(The following speakers are updated on July 12, 2022)
1. Hua Ding, Northeastern University, China
Presentation Title: Investigations on Superplastic Deformation Mechanisms in a Al-Zn-Mg-Cu Alloy
2. Wei Ding, Inner Mongolia University of Science and Technology, China
Presentation Title: High Elongation of Medium-manganese Steel with 1.0Al Added during a Short Intercritical-annealing Time Period
3. Jiangkun Fan, Northwestern Polytechnical University, China
Presentation Title: Microstructure Evolution of Metastable β Titanium Alloy under Different Thermo-mechanical Coupling Processes
4. Feng Fang, Northeastern University, China
Presentation Title: Microstructure Evolution and Strengthening Mechanism in Non-Oriented Silicon Steel with High Strength
5. Carlos Garcia-Mateo, National Centre for Metallurgical Research CENIM-CSIC, Spain
Presentation Title: The Challenges of Ausforming Medium C Bainitic Steels.
6. Jian Gong, Beijing Shougang Co.,Ltd, China
Presentation Title: Recent Development of Grain-Oriented Silicon steel in Shougang
7. Dayong Guo, Ansteel Iron and Steel Research Institute, China
Presentation Title: Effect of TMP on Precipitation of Grain Boundary Cementite of Wire Rod for Super and Ultra High Strength Steel Cords
8. Zhanli Guo, Sente Software Ltd, United Kingdom
Presentation Title: Modeling Evolution of Microstructure and Flow Stress During Hot Rolling of Microalloyed Steels
9. Heung Nam Han, Seoul National University, Korea
Presentation Title: Electric Current Induced Enhancement of Recrystallization Kinetics in Steel
10. Ke Huang, Xi'an Jiaotong University, China
Presentation Title: Special Contribution of Electric Resistance Heating in Al-Mn Alloy Thermo-Mechanical Processing
11. Sihai Jiao, Baoshan Iron & Steel Co.,Ltd, China
Presentation Title: To be confirmed
12. Yonglin Kang, University of Science and Technology Beijing, China
Presentation Title: To be confirmed
13. Jin You Kim, POSCO, Korea
Presentation Title: Methodology for Alloy Design of Steel Using Prediction Model and Optimization
14. Yoosung Lee, Hyundai Steel, Korea
Presentation Title: Devlopment FM Width Predict Model Using Various AI Tools
15. Chang-Hoon Lee, Korea Institute of Materials Science, Korea
Presentation Title: Development of New Lightweight Stainless Steels with Excellent Tensile Property
16. Lixun Li, Laoting Iron & Steel Co., Ltd. of HBIS Group, China
Presentation Title: The Basic Supporting of Advanced Data Communication System to Intelligent Steel
17. Jianping Li, Northeastern University, China
Presentation Title: Shear Band in AZ91 Magnesium Alloy Produced by Warm Compression
18. Shujun Li, Institute of Metal Research, Chinese Academy of Sciences, China
Presentation Title: Effect of Oxygen Solutes on the Morphology and Mechanical Properties of Ultrafine-Grained Beta Type Titanium Alloy
19. Xu Li, Northeastern University, China
Presentation Title: Data Driven-Based Prediction and Analysis of Effective Length of Steel Plates
20. Fei Lin, University of Wollongong, Australia
Presentation Title: Fabrication of Al Matrix Composites Reinforced with TiC and GNPs by Spark Plasma Sintering at Different Temperatures
21. Dongsheng Liu, Jiangsu Shagang Group Co., Ltd, China
Presentation Title: Control on Cleavage Fracture in TMCP Processed Ultra Thick Steel Plates with Crack Arrestability
22. B. Lopez, Ceit-BRTA, Spain
Presentation Title: The Non-Recrystallization Temperature in Nb-based Steels: From the Laboratory to Industrial Conditions
23. Song Lu, KTH Royal Institute of Technology, Sweden
Presentation Title: Atomistic Insights on Deformation Mechanisms in Steels and High-Entropy Alloys
24. Yao Lu, University of Wollongong, Australia
Presentation Title: Determination of Static CCT Curve and Two-step Heat Treatment process of Spring Clip for High-speed Railway
25. Yonglin Ma, Inner Mongolia University of Science and Technology, China
Presentation Title: An Idea of Improving Fatigue Properties of Aluminum Alloy Combining Controllable Electromagnetic Energy (CEME) with Casting and Aging Process
26. Hucheng Pan, Northeastern University, China
Presentation Title: Mechanistic Investigation of the Novel Low-Cost Mg-Ca Based Extrusion Alloy with High Strength-Ductility Synergy
27. B. Pereda, Ceit-BRTA, Spain
Presentation Title: Effect of Reheating Temperature on TMP in Nb Based Microalloyed Steels
28. Jianjun Qi, The Centre Iron and Steel Technology Research Institute of HBIS, China
Presentation Title: Investigation of the Factors of Quenched and Tempered 55SiCr Steel Wire Tensile Area Reduction Ratio and Industrial Optimization Trial
29. Dmitrii Ringinen, OMK Vyksa Steel Works, Russia
Presentation Title: Microstructural Features of X100 Plate and Pipe Production with Increased Impact Toughness and Cold Resistance
30. Gang Sha, Nanjing University of Science & Technology, China
Presentation Title: New Insights into High-Temperature Oxidation of Steels by Atomic Scale Investigation
31. Hongwu Song, Institute of Metal Research, Chinese Academy of Sciences, China
Presentation Title: Effect of Initial Texture on the Formability of Zircaloy-4 Sheet in Stamping with FEM-VPSC Modeling
32. Christof Sommitsch, Graz University of Technology, Austria
Presentation Title: Investigations on the Hot Ductility Behavior of a Continuously Cast Low Alloyed Steel
33. Dong-Woo Suh, Pohang University of Science and Technology, Korea
Presentation Title: Application of Chemical Heterogeneity for Microstructure Control in Advanced High Strength Steels
34. Bin Sun, Shenyang University, China
Presentation Title: Effect Water Vapor of Ferritic Stainless Steel on Oxidation Behavior at 1100℃
35. Isaac Toda-Caraballo, National Centre for Metallurgical Research (CENIM-CSIC), Spain
Presentation Title: Improvement of the Rolling Contact Fatigue Behavior on High-Speed Railway Steel by Using Laminar Plasma Quenching Technology
36. Zhinan Yang, Yanshan University, China
Presentation Title: Making Higher Strength and Higher Ductility Composite Steel
37. Lianwen Wang, Lanzhou University, China
Presentation Title: Melting Point Depression Method for Determining the Solid-Liquid Interfacial Energy of Metal Elements
38. David San-Martin, Spanish National Centre for Metals Research (CENIM-CSIC), Spain
Presentation Title: Improving the Creep Strength of 9Cr Ferritic/Martensitic Steels via MX Precipitation Optimization
39. Yongjie Zhang, Tohoku University, Japan
Presentation Title: Interphase Precipitation and Resultant Strengthening in V-Ti and V-Nb Multiple Microalloyed Low-Carbon Steels
40. Meng Wang, China metal association high mill equipment technology branch, China
Presentation Title: Research on High Line Stilmore Air Cooling Model
41. Yang Yu, Shougang Research Institute of Technology, China
Presentation Title: Combination Effect of Si and P on Oxidation Characteristics of Steel
42. Xiaojun Wang, Harbin Institute of Technology, China
Presentation Title: Production of Bulk Cost-Effective Magnesium Matrix Composites
43. Xiaonan Wang, Soochow University, China
Presentation Title: Numerical Modeling of Unmixed Zone and Macrosegregation Distribution during MIG Welding of an AA6063 Alloy with an ER5183 Filler Metal
44. Haiwei Xu, Shougang Research Institute of Technology, China, China
Presentation Title: Practice and Exploration of the Multi-mode Continuous Casting & Rolling Plant
45. Xin Xue, Fuzhou University, China
Presentation Title: Thermo-mechanical Modelling and Distortion Analysis of Dissimilar Ti/Al Laminated Composite Plate by Non-equal Channel Lateral Co-extrusion
46. Chi Zhang, Dalian University of Technology, China
Presentation Title: Modeling the Microstructure and Texture Evolution during Annealing Process of Ferritic Stainless Steel using Cellular Automaton Method
47. Hai Zhang, Soochow University, China
Presentation Title: Macrosegregation in Aluminum Dissimilar-Filler Welding
48. Yongqing Zhang, CITIC Metal Co., LD, China
Presentation Title: Understanding and Use of TMP Concept for Successful X80 Steels in China
49. Zhongwu Zhang, Harbin Engineering University, China
Presentation Title: Enhanced Strength via Nanoprecipitate in a Maraging Stainless Steel
50. Yongqing Zhao, Northwest Institute for Non-ferrous Metal Research, China
Presentation Title: R & D of New High Titanium Alloys in China
Registration Deadline for Authors
August 15, 2022
Submission Deadline for Poster Presentation Document:
August 10, 2022
Submission Deadline for Oral Presentation Document:
August 15, 2022